SERVICE · REMOTE HANDS

Remote hands: eyes & hands on site.

Reboots, part swaps, console access and troubleshooting, wherever your hardware lives. One partner, one monthly invoice, every location.

Tell us what you need
Layer One engineer working hands-on at a populated storage rack

WHAT WE DO

On-site every time.

Hardware tasks handled by engineers who know their way around a rack.

  • Reboots & power-cycling
  • Part swaps (disks, PSUs, RAM, NICs)
  • Cabling & relabeling
  • IPMI/BMC configuration
  • Visual inspections with photo proof
  • Troubleshooting with our engineers on the line

HOW IT WORKS

From ticket to closed.

Remote hands are physical-layer datacenter tasks, reboots, part swaps, cabling, BMC/IPMI configuration and troubleshooting, carried out on site by an engineer on your behalf, so nobody on your team has to get on a plane. You raise a ticket with what needs to happen; we go to the rack and handle it. In the Netherlands that is our Amsterdam team or our Rotterdam team; elsewhere an engineer from one of our 45 cities.

Hardware is hardware, so we stay vendor-agnostic. Cisco, HPE, Dell and Supermicro are daily drivers, but the brand doesn't change the job: we adapt to whatever is racked. Need an OS installed or a switch configured? That's where remote hands stop and your team takes over, live, through a console session we set up on site, more on that below.

Every job is closed the same way: photo proof of what was done and a written report, so you have a record without being in the room. Work is documented, not just done, which is what keeps a rack traceable a year later instead of a mystery.

We won't print a minutes-promise that ignores reality. Response expectations are agreed per customer in our Fair Use SLA: committed support, scope set up front, no paying for capacity you never use. Typical calls? A disk or PSU swapped before a rebuild, a server that won't POST and needs eyes on the console, a cable run relabeled, a BMC configured so you can take it from there. If it lives in the rack, we can put hands on it.

ONE PARTNER, EVERY LOCATION

1 contact

One point of contact for every ticket and everywhere else your racks live.

1 invoice

One monthly invoice covering all locations, instead of a stack of local vendors billing separately.

1 way of working

The same ticket flow, documentation standard and photo proof at every facility, in every country.

WHY ONE PARTNER

One partner vs a patchwork of local vendors.

Racks in more than one facility usually means a different remote hands vendor per building: the colo's own team here, a local firm there, each with their own contact, their own invoice and their own way of working. Colocation providers stop at their own buildings, and dispatch marketplaces send whoever is available. We run one method everywhere, and it shows in the day-to-day:

A vendor per location Layer One
Points of contactOne per city or facilityOne, for everything
InvoicesOne per vendor, every monthOne per month, all locations
Way of workingDifferent per vendorIdentical everywhere: ticket in, photo proof out
DocumentationScattered across mailboxesOne customer portal, per-job records
Adding a locationFind, vet and onboard a new vendorTell us the address

TERMINOLOGY

The same work, under any name.

The market sells this work as smart hands, hands & eyes, IMAC (install, move, add, change) or emergency call-outs. Whatever your facility calls it, we deliver it as remote hands: the full physical layer, urgent work included, with one honest boundary. We stay on the hardware and the console; your OS, your configs and your remote access stay yours.

What the labels actually mean

PRICING

How pricing works.

Two models, no surprises. Tickets are billed hourly: you pay for time on the job and nothing more. Projects get a fixed quote, agreed before we start. Everything lands on one monthly invoice, whichever locations we worked in that month, and committed support runs through our Fair Use SLA: scope agreed up front, no paying for capacity you never use.

You will not find a rate card here, on purpose: a real number beats a placeholder. A short intake tells us what you need and where, and you get a concrete quote back. Start the intake

HOW ACCESS WORKS

Remote hands, not smart hands

We handle everything on the hardware side, up to the point where your team takes over. Need to configure a switch or install an OS? We set up a remote session: your engineer works through our laptop's console connection, live on site. Your configs stay yours; our hands stay on the hardware.

Read: remote hands vs. smart hands
Layer One engineer in a branded polo working hands-on at datacenter hardware

REMOTE HANDS BY CITY

Engineers in 45 cities, across 25 countries.

Amsterdam

Our Amsterdam team works in all datacenters in and around the city, from Nikhef on Amsterdam Science Park to the campuses in Amsterdam Southeast.

Remote hands in Amsterdam

Rotterdam

Our Rotterdam team works in all datacenters in the port city and the region around it, from Smartdc and Bytesnet to The Hague and Delft.

Remote hands in Rotterdam

Frankfurt

Field engineers based in Frankfurt, working in all datacenters in and around the city, including Equinix, NTT, firstcolo and Digital Realty.

Remote hands in Frankfurt

London

Field engineers based in London, working in all datacenters across the metro, from the Telehouse Docklands campus to Equinix and Digital Realty.

Remote hands in London

Paris

Field engineers based in Paris, working in all datacenters in and around the city, including Equinix, Digital Realty and Telehouse.

Remote hands in Paris

Singapore

Field engineers based in Singapore, working in all datacenters across the island, including Equinix, Global Switch and Digital Realty.

Remote hands in Singapore

Sydney

Field engineers based in Sydney, working in all datacenters in and around the city, including Equinix, NEXTDC and DigiCo.

Remote hands in Sydney

Tokyo

Field engineers based in Tokyo, working in all datacenters in and around the city, including Equinix, NTT and AT TOKYO.

Remote hands in Tokyo

Los Angeles

Field engineers based in Los Angeles, working in all datacenters in and around the city, from One Wilshire to Equinix and Digital Realty.

Remote hands in Los Angeles

Warsaw

Field engineers based in Warsaw, working in all datacenters in and around the city, including Equinix, Atman and Orange Polska.

Remote hands in Warsaw

Dallas

Field engineers based in Dallas, working in all datacenters across the metro, including Equinix, DataBank, Cologix and Digital Realty.

Remote hands in Dallas

Mumbai

Field engineers based in Mumbai, working in all datacenters in and around the city, including Equinix, CtrlS, NTT and Web Werks.

Remote hands in Mumbai

New York

Field engineers based in New York, working in all datacenters across the metro, including Digital Realty, Equinix, DataBank and Telehouse.

Remote hands in New York

Ashburn

Field engineers based in Ashburn, working in all datacenters across Northern Virginia, including Equinix, Digital Realty, DataBank and NTT.

Remote hands in Ashburn

Chicago

Field engineers based in Chicago, working in all datacenters across the metro, including CoreSite, Equinix, Digital Realty and Netrality.

Remote hands in Chicago
All 45 cities on the map

Remote hands questions.

What does remote hands include?

Remote hands covers the physical-layer work in the datacenter: reboots and power cycles, part swaps, rack cabling and cable management, console access, BMC configuration and visual checks. You direct the work by ticket; our engineer executes on site and closes with photo proof.

Do you offer smart hands?

"Smart hands" is what many vendors call the same on-site work we sell as remote hands: reboots, part swaps, cabling, console access and BMC-level config. So yes for the work itself, with one honest boundary: we stay at the physical layer and the console. Your OS, your configs and your remote access stay yours. For configuration beyond that, we set up console sessions so your engineers work through our connection, live on site.

Which datacenters can you work in?

Any facility where you can arrange access for our engineers. In the Netherlands our Amsterdam and Rotterdam teams cover facilities across the country, and worldwide we work from engineers in 45 cities for remote hands, rack & stack, migrations and decommissioning.

Why use one remote hands partner across locations?

Because a partner per facility means a contact per facility, an invoice per vendor and a different way of working in every building. With one partner you get one point of contact, one monthly invoice covering all locations, and the same ticket flow, documentation and photo proof everywhere your racks live.

Do you handle urgent, same-day work?

Yes. WhatsApp is the fastest way to reach an engineer directly. We agree the response window per job instead of printing a minutes-promise that ignores reality.

Need hands in the datacenter?

Tell us what you're running. We'll tell you how we'd handle it.